Product ID:CUT-MAX BASE 7
MSDS Date:08/27/1990
FSC:9150
NIIN:00N042003
MSDS Number: BTGQM

E F HOUGHTON & CO

VALLEY FORGE, PA 19482
US

Emergency Phone: 215-666-4105;800;424-9300(CHEMTREC)

Info Phone: 215-666-4105

Preparer: ROBERT E. WILLIAMS

Cage: 73227

HOUGHTON INTERNATIONAL INC

930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

5 MG/M3;10 STEL OIL MIST.

CAS: 64742-10-4

Fraction By Weight: 1-10%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: SEE INGREDIENT NAME

5 MG/M3;10 STEL OIL MIST.

CAS: 64741-45-3

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: SEE INGREDIENT NAME

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: AVOID BREATHING PROD
MISTS. BREATHING MISTS IN EXCESS OF THE TLV MAY CAUSE IRRIT OF
UPPER RESP TRACT. PERSONS WITH CHRONIC RESPIRATORY DISEASE MAY SHOW
INCREASED SYMPTOMS DUE TO IRRITATI ON. SKIN: MAY BE SLIGHT IRRITANT
ON PROLONGED CONTACT. EYE: MILD IRRITANT. INGEST: NO SIGNIFICANT
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EFFECTS KNOWN. CHRONIC: NONE KNOWN
FOR THIS PRODUCT.
Medical Cond Aggravated by Exposure:PERSONS WITH CHRONIC RESPIRTORY
DISEASE MAY SHOW INCREADED SYMPTOMS DUE TO IRRITATION.

First Aid:INHAL: REMOVE TO SOURCE OF FRESH AIR. SKIN: WASH WITH SOAP
AND WATER. EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN; CONSULT
PHYSICIAN. INGEST: DO NOT INDUCE VOMITING; CONSULT PHYSICIAN.
PRODUCT IS MAINLY SULFURIZED FATTY OIL.

Flash Point Method:COC
Flash Point:500F,260C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE. TREAT AS AN OIL FIRE.

Spill Release Procedures:NOT CONSIDERED A POLLUTANT IF EFFECTIVE WASTE
DISPOSAL METHODS ARE UTILIZED. KEEP OUT OF SEWERS AND STREAMS.
APPLY OIL ABSORBENT TYPE MATERIAL AND SWEEP UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PRODUCT NOT HARMED BY FREEZING. IF
FROZEN, WARM TO 85F BEFORE USING. DO NOT STORE AT TEMPERATURES
ABVOE 120F. AVOID CONTACT WITH STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:REQUIRED ONLY IF TLV FOR OIL MIST IS EXCEEDED.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:EXHAUST TYPE IF MISTING; OTHERWISE GENERAL TYPE IS
SATISFACTORY.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NIL
Vapor Density:>10
Spec Gravity:0.98
Evaporation Rate & Reference:VERY LOW
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS BLACK FLUID; SULFUIZED OIL ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL; OXIDES OF CARBON AND SULFUR,
TRACE HYDROGEN CHLORIDE.

Waste Disposal Methods:FOLLOW REGULATIONS FOR DISPOSAL OF WASTE MINERAL
OIL. MAY BE INCINERATED UNDER CONTROLLED CONDITIONS. DISPOSAL MUST
BE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.